Visits

Showing posts with label Ampeg. Show all posts
Showing posts with label Ampeg. Show all posts

Friday, March 14, 2014

Simulating Pickups & Splitting Signals


SHO Clone & Pickup Sim


Last weekend I decided to make Jack Orman's Pickup Simulator. I've had the parts collected in a little bag for a long, long time. It's a really simple circuit, and one that I really should have built earlier (say back in 2009).

The purpose of the Pickup simulator is to deal with certain pedals that prefer to be fed straight from the guitar and not through the buffer of another pedal (EG: Fuzzface, Big Muff, Octavio).

I didn't have the Mouser 42TL019 transformer on hand, but I did have the Mouser 42TL018 which has a similar enough primary coil value.

The pickup simulator works really well, but that's not the only reason I wanted to make it.

I usually record in stereo with one effected and one dry track. The drawback with this is the guitar had to go into a pedal that had stereo outputs. Which by default, introduces a buffer for each channel.

Since the schematic shows that the transformer can be tapped to obtain two different impedances, I figured it should also be useful in sending the signal to two destinations. Even five, if you don't mind a bit of transmission loss in the secondary coil.

Both of my guesses turned out to be correct.

Splitting the primary gives the best signal, and improved the character of the guitar signal significantly when compared to the buffer split.

One side of the stereo pair goes through effects, the other simply goes into an analogue amp/speaker simulator. It was on the clean side that I noticed the most improvement (Especially on the Bass VI).

This is a no frills tool, but it has the potential to bring some life back into otherwise lifeless sounding effects.

This has been one of my cheapest builds, and its probably the simplest. I wish I had invented it, this should really be available as an off the shelf product.

Until next time.

T.A.P.O.R.


Tuesday, December 6, 2011

2011 - Initial Pedal Reviews

I've got my hands on two pretty nifty pedals recently, I was a bit dubious of their claims, but it turns out they're quite pleasing to the ear.

The pedals I'm talking about are the Tech 21 VT Bass and the Boss BC-2 Combo Drive. I have been after a decent bass sound for years, but only play occasionally and have no desire for an amp. I've played around with a couple of VST plugins that emulate some well known bass amps, but have never really been satisfied with anything aside from the clean tones.

I'd been looking at a bunch of solutions for going direct, including the Digitech Bass Squeeze, as it has speaker modeling. Unfortunately I couldn't find one in store anywhere, so I never got it.

I'd been impressed by the Sansamp products in the past, so I decided to find out what was available these days. This is how I came across the VT Bass. Demos of the clean sound were scarce, but the reviews were glowing. I figured that if I found one at a reasonable price, it would be mine. I have to say, I wasn't disappointed. As soon as I plugged it in, I was greeted by a thick warm sounding bass. I fiddled about with the settings card and got some nice tones, though all were dirty.

The sound that I was after was the sound of an Ampeg SVT fridge setup. Low and clean and huge.
Tech 21's pedal really delivers in this regard. I get what I want, without spending $4000 on an amp.
Sure it's not a magic box, but it gets me the tone that I want without much fuss or an eviction notice.

Since I have to do most of my guitar playing with headphones I have been messing around with direct solutions for years. The Digitech Bad Monkey is consistently the last item in the signal chain before the mixer.
I like the tone of the built in cabinet simulator. The only down side is that the bad monkey doesn't do clean, even on the lowest setting. I'd seen that the Boss BC-2 had just been released in Oz and was pretty cheap.
The demo video below sounded pretty good so I picked it up on a whim. Got it home and was able to mess with it for about an hour. Combined with the Bad Monkey it's quite dark sounding compared tot he sound in the video and as such it doesn't exactly sound like the Beatles, but it does a nice clean boost on one side and really heavy distortion on the other. The EQ is nice and makes up for the lack of bottom end in my Surfcaster.

My favourite setting was with the Treble on max, Bass at 75% and the "sound" at 25%. This allows for some grit when picking really hard or nice thick clean when playing gently. I even plugged  it into my Fender Princeton and found that there was something missing when switched off.

I hope to get some demos recorded soon, but my computer is in need of a rebuild as it's spitting the dummy every time I try to get some sound on disc. Meanwhile, check out the videos from Youtube.